ASTM D4576-16 湿铬鞣革 抗霉菌生长的标准试验方法

时间:2019-01-12 08:46:28 来源:CIAA 点击量:

标准编号:ASTM D4576:2016
中文标准名称:湿铬鞣革 抗霉菌生长的标准试验方法
英文标准名称:Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
代替标准号:ASTM D4576-08
1.1 This test method covers the determination of mold growth resistance of Wet Blue and Wet White subject to storage and shipping requirements and intended for use in leather manufacturing. This test method may not be suitable to evaluate fungicides that are inactivated by proteins. This includes alkyldimethylbenzyl ammonium chlorides.
1.2 Conclusions about mold growth resistance are drawn from the results by comparing the test with a simultaneously run control of known resistance. Success or failure is determined by the amount of mold growth relative to the control.
1.3 To allow use of this test method by any laboratory, flexibility has been permitted in times, temperature, and humidity of incubation, inoculum, hide sampling area, and choice of control. These may be adjusted to fit local conditions but must be standardized.
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

:: 转载本网专稿请注明出处"中国抗菌产业网"

地址:北京市海淀区中关村东路29号   邮编:100190   服务信箱   协会QQ群号:42270357
服务电话:010-62521791  010-82543499  010-82543777
版权所有:北京云记科技有限公司  Copyright©2008-2016 All Rights Reserved